Damper Overhaul

Damper Overhaul
All machining is done In-house.
You can be assured that with any specification changes that you require you will receive the same quality of product found in your original Fightex damper.
So retaining the performance you can expect from our Fightex dampers.



Price list of overhaul work

At the time of order
Contents of work Price/per kit Note
Green Chromate surface treatment ¥4,000 add Damper style TypeA:F/R Standard design
¥5,000 add Damper style TypeB:F Up side down design & R Standard design
¥6,000 add Damper style TypeC:F/R Up side down design
Overhaul of customers own damper
Contents of work Price/per damper Note
Basic overhaul ¥12,000 Cleaning, seals and o-rings replaced, oil changed, honing.
Basic overhaul + damping force changes ¥16,000 Cleaning, seals and o-rings replaced, oil changed, honing + piston valve, shim, needle, jet.
TYpe ST, EX, EX-G basic overhaul ¥20,000 Cleaning, seals and o-rings replaced, oil changed, honing.
TYpe ST, EX, EX-G basic overhaul + damping force changes ¥24,000 Cleaning, seals and o-rings replaced, oil changed, honing + piston valve, shim, needle, jet..
Upside down case overhaul ¥4,800~ Cleaning, bush, seals and o-rings replaced, grease changed.
Short stroke modifications 
up to 30mm ¥1,000 Added parts to suit.
above 30mm ¥7,500 Additional machining required.
Short case modifications (Standard Type) up to 15mm ¥4,000 Additional machining required.
above 15mm ¥7,500 Parts replacing required.
*Please tell us your required length.
Short case (chrome plated main body)
Additional machining (Upside Down Type)
modifications additional machining ¥4,000 Additional machining
*Please tell us your required length.
cylinder change ¥10,200 Parts replacing required.
*Please tell us your required length.
Bottom pillow ball modifications (Standard Type) large bush ¥11,600 Damper bottom bracket assembly replaced.
small bush ¥8,900 Damper bottom bracket assembly replaced.
Upside down type (outer) case replace ¥13,600 Additional parts included.
Body cap assembly replaced ¥3,900 If we judge the modification requirements to be dangerous we will be unable to proceed.

♦Addition in the overhaul charge. In some case modifications are not possible.


-If we judge the modification requirements to be dangerous we will be unable to proceed.
-We require the customer to remove and keep the spring and the upper mount before sending the damper for overhauling.
-Give as much information as possible when sending the damper for overhaul, for a quick response.

-Extra parts may be required, when overhauling the damper.